clover - the state of bass
FAQs
Set Up Tone Controls
bridge adjustment
Trussrod adjustment
Strings
Battery
Trussrod adjustment
How can I adjust the trussrod?

All Clover basses come with double-dual-action trussrod. The operations are effected by turning the truss rod adjustment nut (Please use the included 4mm allen wrench only) clockwise to decrease forward bow, or counter-clockwise, to increase forward bow. Never adjust more than 1/4 turn at one step. Full stabilization can take from hours to several days after the tension on the neck is altered, but most of the effect of 1/8 of a turn should manifest itself within an hour.
If you have no experience with truss rod adjustment, we highly recommend the bass to be taken to a qualified dealer. Over adjustment in any direction can cause damage and may not be covered under warranty.




Technical changes reserved.


Basses


Avenger.4
Avenger.5
Avenger.6


XP15.4
XP15.5
XP15.5 fretless
XP15.6
XP15.6 fretless


H.4 Edition
HP.4 Edition
H.5 Edition
HP.5 Edition
Classic.6


Argo.4-1
Argo.5-1
Argo.5-1 fretless
Argo.5-2

 Contact  Imprint  Disclaimer © 2005 Clover · Germany